Paradox IP150 MQTT IP İletişim Modülü

Paradox IP150 MQTT, IP iletişim modülüdür.

Internet Module

The IP150 Internet Communication Module is used to report and connect remotely to Paradox systems via the internet. Reporting to the central station’s CMS is possible via Paradox IPC10 and VIPC20 Receiver/converter. The IP150 connects to the system remotely with the BlueEye application, PC software, and provides remote upgrade of the system. It can connect with an Ethernet cable. The IP150 can also be upgraded remotely. The IP50 can also send system events via email.

Reports only to IPC10 and VIPC20 receivers (does not support reporting to IPRS7 / IPR512 )

Compatible only with BlueEye (does not support Insite Gold), Babyware 5.6.52 , Infield 5.6.55 , NEware 5.2.32 , (and up)

Özellikler

• Internet module
• Uses MQTT technology
• Supports up to 2 receivers
• Ethernet on board
• Compatible with EVOHD+, SP+, MG+ and most panels manufactured after 2012
• Requires a Swan paid site
• Reports only to IPC10 and VIPC20 receivers (does not support reporting to IPRS7 / IPR512)
• Compatible only with BlueEye (does not support Insite Gold), Babyware 5.6.52, Infield 5.6.55, NEware 5.2.32, (and up)
• Does not support static IP connection
• Can not be downgraded back to v5.xx firmware

Nerelerde kullanılır?

Alarm sisteminin menzilini, iletişim yollarını veya otomasyon yeteneklerini genişletir; aydınlatma, kapı ve elektrikli cihazların kontrolüne olanak tanır.

Kurulum ve uyumluluk

Sistem Insite Gold uygulaması ile uzaktan izlenebilir ve yönetilebilir.

Tüm özellikler

• Internet module
• Uses MQTT technology
• Supports up to 2 receivers
• Ethernet on board
• Compatible with EVOHD+, SP+, MG+ and most panels manufactured after 2012
• Requires a Swan paid site
• Reports only to IPC10 and VIPC20 receivers (does not support reporting to IPRS7 / IPR512)
• Compatible only with BlueEye (does not support Insite Gold), Babyware 5.6.52, Infield 5.6.55, NEware 5.2.32, (and up)
• Does not support static IP connection
• Can not be downgraded back to v5.xx firmware